Pay in installments of $6.22 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 18 - Jul 23
For Your Every Summer RSVP, with Code: SUMMER15
Description
un ane auf der strasse otto von thorenEin Esel auf der Strae: Ein Moment lndlichen Lebens Ein Esel auf der Strae, ein Werk von Otto von Thoren, beschreibt die Einfachheit und Schnheit des Landlebens. Diese kunstdruck fngt einen Moment der Ruhe ein, in dem der Esel, Symbol von Arbeit und Geduld, auf einem Landweg steht. Die sanften und natrlichen Farben sowie das durch die Bume gefilterte Licht schaffen eine friedliche und kontemplative Atmosphre. Der Knstler gelingt es, eine authentische
Ein Esel auf der Straße: Ein Moment ländlichen Lebens Ein Esel auf der Straße, ein Werk von Otto von Thoren, beschreibt die Einfachheit und Schönheit des Landlebens. Diese kunstdruck fängt einen Moment der Ruhe ein, in dem der Esel, Symbol von Arbeit und Geduld, auf einem Landweg steht. Die sanften und natürlichen Farben sowie das durch die Bäume gefilterte Licht schaffen eine friedliche und kontemplative Atmosphäre. Der Künstler gelingt es, eine authentische Emotion zu vermitteln, die den Betrachter einlädt, innezuhalten und die Schönheit der kleinen Dinge des Alltags zu schätzen. Otto von Thoren: Ein Blick auf die Natur und die Ländlichkeit Otto von Thoren, Maler des 19. Jahrhunderts, ist bekannt für seine Darstellungen von Natur und ländlichem Leben. Beeinflusst von der romantischen Bewegung, hat er die Essenz der Landschaften und Szenen des Alltags mit besonderer Sensibilität eingefangen. Seine Werke, oft von Nostalgie geprägt, spiegeln einen tiefen Respekt vor Natur und ländischen Traditionen wider. Ein Esel auf der Straße ist ein perfektes Beispiel für seinen Stil, das die Schönheit einfacher Szenen hervorhebt und gleichzeitig die Verbindung zwischen Mensch und Natur feiert. Eine dekorative Anschaffung mit vielfältigen Vorzügen Dieser kunstdruck von Ein Esel auf der Straße ist ein dekoratives Stück, das Ihrem Interieur einen Hauch von Charme und Gelassenheit verleiht. Ob im Wohnzimmer, Schlafzimmer oder Büro, dieses Bild lädt zum Träumen und zur Kontemplation ein. Seine Druckqualität und die Liebe zum Detail machen es zur idealen Wahl für alle, die ihre Dekoration mit einem authentischen Kunstwerk bereichern möchten. Die ästhetische Anziehungskraft dieses Leinwandbildes macht es zu einem zentralen Element, das Ihre Gäste begeistern und eine warme Atmosphäre bei Ihnen zu Hause schaffen wird.Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.9 ★★★★★
Based on 6 reviews
Sort
Product Reviews
★★★★★ 5
Saves So Much Time, Perfect Fit On Mercruiser Pre-Alpha Outdrive.
This is a very useful kit. Perfect fit to exchange and align the gimbal bearing on a Mercruiser MR/Pre-Alpha Outdrive. The metal rods are strong and well machined to fit the gimbal bearing and the template lines up great with the housing studs. The overall production quality is very good. Great value because the tools are very durable but for me the biggest value is the time saved. I had the bearing out in about 10 minutes. The ability to line up the bearing before attempting to attach the outdrive upper gear unit is very convenient and saves so much time. This are simple tools, very easy to use.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 1, 2026
★★★★★ 5
Easy to use
Works great
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 9, 2026
★★★★★ 5
Works well. You need to drill a 3/8” hole
Appears to be well made, alignment bar slides in nicely. As stated, you need to drill a hole in the bar for the gimble bearing driver, the directions are not clear, what I did was before I take out the old gimble bearing, put an O ring on the bar close to the last step on the bar, slide the bar all the way in, then carefully slide the bar out, this marks the distance from the back of the gimble bearing to where the shaft on the outdrive bottoms out, move the O ring a 1/4” towards the stepped part of the alignment tool (this is so you won’t bottom out the alignment tool when driving the gimble bearing in) then slide the driver puck up to the O ring and use a 3/8” diameter transfer punch through the side hole in the puck to mark the bar. You need to drill a 3/8” diameter hole in the alignment bar, two V blocks, some clamps, and a drill press will make drilling much easier, after the bar is securely mounted and centered in the drill press, use a center drill, then 1/4” drill first, using plenty of oil, drill all the way through, then use the 3/8” drill, deburr both sides and you should be good to go. People complain that it doesn’t come pre-drilled, the reason is that not all out drives are the same so you have to fit it to the outdrive that you have. Fortunately, I have a machine shop at my house and have a jig setup with various drill bushings, but the method I described above should work for you. Just make sure you’re perfectly centered and secure before you start drilling.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 16, 2026
★★★★★ 5
A must pull your gimbal bearing
You do need to drill a hole but worked perfect
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 26, 2025
★★★★★ 5
Worked for Volvo Penta SX Gimbal Bearing
Very heavy tool, I was surprised. Pulled my bearing like it was nothing. Putting the new bearing in was a little more difficult as you have to drill a hole in the engine alignment shaft where it will work for your particular outdrive. Not hard, but it does not come pre-drilled as the required depth for each particular gimbal bearing differs by manufacturer and model. Measure your bearing placement before removal and check that it was installed correctly in the first place. The bearing should line up with the grease fitting and the o-rings on the drive shaft should end up riding in the middle of the bearing. once you have your measurement drill the hole, I used a drill press. I suppose you could use it on multiple outdrive models as long as you can drill more holes.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 5, 2023