SALTDOGG® GAS STAINLESS HOPPER SPREADER WITH PINTLE CHAIN CONVEYOR

SALTDOGG® GAS STAINLESS HOPPER SPREADER WITH PINTLE CHAIN CONVEYOR1400202SS SALTDOGG GAS STAINLESS HOPPER SPREADER WITH PINTLE CHAIN CONVEYOR Designed for dump bodies and flatbeds with a minimum 13,000 lb GVW (gross vehicle weight). 120 in. hopper. 10 1 2 HP gas engine with convenient electric start and throttle control. Spreads bulk salt, bulk sand, or a 50 50 salt sand mix. In cab controls with independent variable speeds for the conveyor and spinner. 12 in. poly spinner broadcasts up to 30 ft, using a regular or

1400202SS - SALTDOGG® GAS STAINLESS HOPPER SPREADER WITH PINTLE CHAIN CONVEYOR

• Designed for dump bodies and flatbeds with a minimum 13,000 lb GVW (gross vehicle weight).
• 120 in. hopper.
• 10-1/2 HP gas engine with convenient electric start and throttle control.
• Spreads bulk salt, bulk sand, or a 50/50 salt/sand mix.
• In-cab controls with independent variable speeds for the conveyor and spinner.
• 12 in. poly spinner broadcasts up to 30 ft, using a regular or extended chute.
• Versatile 12 in. chain conveyor drive.
• High quality, 304 stainless steel construction for optimum corrosion resistance.
• Stainless steel inverted V improves flow and reduces stress on the drive line.
• Top screen included.
• Optional extended chute available.
• Made in the USA.

Buyers Products SaltDogg Gas Stainless Hopper Spreader with Pintle Chain Conveyor gives contractors and businesses a gas-powered spreader ready for commercial applications using bulk salt, bulk sand, or a 50/50 salt/sand mix. Its 10 ft hopper fits an extended bed 1 ton truck. With electric start and in-cab throttle control, the spreader combines the power of a gas engine with modern spreader conveniences. The spreader comes equipped with a 12V electric clutch and in-cab, 3 position momentary switch and throttle. It's powered by a 10-1/2 HP Briggs and Stratton Intek industrial/commercial engine with a battery for electric start. A heavy duty drive shaft and 1-1/8 in. sealed bearings are designed for long life. The high-torque conveyor gearbox has a 20:1 ratio with a 1 in. input shaft and 1-1/8 in. output shaft on tapered roller bearings to provide extra power on start up. The hopper, which comes with a top screen and fully welded frame, is made from high quality 304 stainless steel for long lasting corrosion protection. It's equipped with a steel pintle chain conveyor and features a stainless steel inverted V to reduce stress on the drive line and improve flow. The high-flow conveyor is 12 in. wide with a stainless steel floor. An adjustable feedgate with friction lock offers additional material flow control. A 12 in. poly spinner casts material 2 ft to 30 ft. The spreader is available with a regular or extended chute. Adjustable baffles allow you to adjust the spread pattern to match your use. The SaltDogg Gas Stainless Hopper Spreader with Pintle Chain Conveyor is comparable to Swenson® PV and Henderson® FSP.

• Capacity - 1.80 yd¬≥
• Chute Primary Material - 304 Stainless Steel
• ChuteStandardAdjustableExtended - Standard
• Controller Type - In-Cab Throttle/Choke
• Drive Motor Horse Power - 10.50 HP
• Feed Mechanism - Conveyor Chain
• Feed Mechanism - 212 in. Pintle Chain Conveyor
• Gearbox Ratio - 20:1
• Hopper Material - 304 Stainless Steel
• Number Of Motors - 1
• Overall Length - 103.70 "
• Overall Width (At Top) - 47.00 "
• Spinner Diameter - 12.00 "
• Spinner Material - Polyurethane
• Spreading Width Range - 2 To 30 '
• System Voltage - 12 vdc
• Top Screen - Yes
• Vibrator Included? - No
• Works With Bagged #1 Rock Salt - Yes
• Works With Bulk Salt - Yes
• Works With Bulk Sand - Yes
• Works With Salt / Sand Mix - Yes
• Drive Type - Gas
• Hopper Length (In.) - 84.00 "
• Hopper Width (In.) - 47.00 "
• Overall Height (In.) - 32.10 "