Decals, Greek Islands & Floral Scenes Ceramic decals - Enamel Decal - Fusible Decal - Glass Fusing Decal ~ Waterslide Decal 21180

Decals, Greek Islands & Floral Scenes Ceramic decals - Enamel Decal - Fusible Decal - Glass Fusing Decal ~ Waterslide Decal 21180Ceramic Decals are great for ceramic, enameled metal, and glass. The decals have a clear background, the best result in white or light colors,Discover the versatility of these ceramic decals perfect for enamel work on ceramic, enameled metal, and glass. Achieve the best results on white or light colored surfaces with these clear backed decals. Sign in now and receive 30% off your next order. Plus, join my newsletter for tips, advice, and free

Ceramic Decals are great for ceramic, enameled metal, and glass. The decals have a clear background, the best result in white or light colors,Discover the versatility of these ceramic decals perfect for enamel work on ceramic, enameled metal, and glass. Achieve the best results on white or light-colored surfaces with these clear-backed decals.

Sign in now and receive 30% off your next order. Plus, join my newsletter for tips, advice, and free tutorials on improving your enamel work and saving money.
Sign up here: https://manage.kmail-lists.com/subscriptions/subscribe?a=SFQPqy&g=V7SZA2 , or at www.pearlysupply.com

Order the "Secrets of Copper Enameling Finally Revealed" online course here:
course.pearlyenamel.com

ITEM DETAILS
• Ceramic decals
• Clear background

NOTE: The colors of the decals may vary after firing compared to how they appear on the screen

HOW TO WORK WITH WATERSLIDE DECALS:

1. Preparation
• Ensure the surface you’re working on is clean and completely dry.
• Cut the decal to the desired size and shape, leaving a small border around the design.

2. Soaking in Water
• Fill a bowl with lukewarm water.
• Submerge the decal in the water for 30-60 seconds, or until the decal starts to slide easily off the backing paper.

3. Application
• Place the decal on the desired surface while it is still on the backing paper.
• Gently slide the decal off the backing paper onto the surface using your finger or a soft tool.

4. Smoothing and Positioning
• Use a soft cloth or sponge to gently smooth the decal, removing air bubbles and excess water.
• Make sure the decal is properly aligned and free of wrinkles.

5. Drying
• Let the decal dry for several hours or follow the manufacturer’s instructions.
• Ensure the surface is completely dry before proceeding with any further steps or heating.

6. Firing (check below)
• If needed, place the piece in a kiln or use a torch (according to the specific instructions for the type of surface and decal).
• Follow the recommended firing curve as specified in the decal instructions.

7. Finishing:
Once fired and fully dried, the piece is ready for use or further artistic work.

AVAILABLE SIZES:
• 5-7/8 x 8-1/4 in (148 x 210 mm)
• 8-1/4 x 11-3/4 in (210 x 297 mm)

FIRING TEMPERATURE RECOMMENDATIONS:

Enamel:
• In a kiln: Fire at 785°C (1445°F) for 1 minute.
• Torch firing: Heat gently until the decal changes color, then continue until it fuses with the enamel background. For more details, watch the video here.

Glass:
• Ramp from 20°C (68°F) to 590°C (1094°F) up to 640°C (1184°F) (depending on the glass type) over 4 hours.
• Hold at the target temperature for 25-30 minutes, then let the kiln cool down.

Ceramic:
• Ramp from 20°C (68°F) to 785°C (1445°F) in 60 minutes (or as quickly as the kiln allows to reach 1445°F).
• Hold at this temperature for 15 minutes, then let the kiln cool down.

SHIPPING
• Fast Registered Air-Mail
• Delivery in 5-7 business days
• Free DHL express shipping to orders above $250 to most countries (not including Australia and New Zealand)

MORE INFORMATION
Check my YouTube channel "pearlyenamelsupply" for more details and videos: https://youtu.be/HLJSY9OlzA4

Back to shop:
https://Pearlykarpel.etsy.com