Bed Sensor Kit - Rest Home & Hospital Use

Bed Sensor Kit - Rest Home & Hospital UseMat Dimensions: 760mm x 250mm The sensor pad is installed in the bed, under the mattress protector but on top of the mattress. Typically the mat is placed under the weight of the individual's buttocks. A change in pressure is identified as the individual moves from their bed in any direction. This information is detected by the control unit which gives an audible and visible alarm. The controller also provides an output to connect into an existing

Mat Dimensions: 760mm x 250mm

The sensor pad is installed in the bed, under the mattress protector but on top of the mattress.

Typically the mat is placed under the weight of the individual's buttocks. A change in pressure is identified as the individual moves from their bed in any direction. This information is detected by the control unit which gives an audible and visible alarm.
The controller also provides an output to connect into an existing emergency or nurse call system.

If the Sensomat Bed is to be used in a domestic situation, or where there is no existing nurse call system already installed, the control unit does have a localised alarm that will sound in the individual's bedroom. Alternatively, you can order the Sensotrol Wireless Kit to accompany it, which will provide an alarm outside of the individual's bedroom with a range of approximately 70m. 

Do not immerse the Sensomat Bed in water, simply wipe clean with a damp cloth. Not suitable for use with incontinent patients. The Sensomat Bed should always be stored flat and never folded or rolled.