RM-10® 2009 Water Treatment Flocculent, 50 lbs

RM-10® 2009 Water Treatment Flocculent, 50 lbsReactive Separating Agent: Clay based waste water treatment powder used in treatment of spent tumbling fluid. Will allow one step entrapment of emulsified oils and dissolved metals from various waste streams. Use manually or in a tumbling waste filtration system as a simple and environmental alternative to the cost of hauling wastewater to be treated off site, while ensuring that treated effluent will meet Publicly Owned Treatment Works (POTW)

Reactive Separating Agent: Clay based waste water treatment powder used in treatment of spent tumbling fluid.  Will allow one-step entrapment of emulsified oils and dissolved metals from various waste streams. Use manually or in a tumbling waste filtration system as a simple and environmental alternative to the cost of hauling wastewater to be treated off-site, while ensuring that treated effluent will meet Publicly Owned Treatment Works (POTW) discharge limits established by local and state authorities

Flocculent will remove the following contaminants from waste streams:

• Heavy Metals 
• Oils and Grease 
• Suspended Solids

Instruction for basic/manual use:

• Fill pail with wastewater and flocculant at 12 ounces per 30 gallons of fluid
• Manually or using a mixer, mix for 2-3 minutes (If the consistency becomes slimy you have over-mixed the batch)
• Let settle for 3-5 minutes
• Mix for an additional 30 seconds
• Let settle for 3-5 minutes
• Pour off through a filter or open valve in system through filter to allow effluent to filter out solids
• Clean water poured off can be collected and typically discharged to your public waste water system depending on your local laws and requirements.
• Note: The flocculent doesn't remove chemicals, only solids.

Technical Data Sheet