Procolored DTF Direct-to-Film PET A4 Transfer Film | 8.2 in x 328 ft Roll

Procolored DTF Direct-to-Film PET A4 Transfer Film | 8.2 in x 328 ft RollDurability The DTF transfer film is made of polyethylene terephthalate (PET), it is durable, heat resistant and transparent. It can withstand the high temperature during the print curing and heat press. Thickness The thickness of DTF transfer film is 75 microns, which provides more stability and durability than thinner film. Coatings The PET film is coated with a heat activated coating layer on the printing side, make it a simple process to heat press

Durability

The DTF transfer film is made of polyethylene terephthalate (PET), it is durable, heat-resistant and transparent. It can withstand the high temperature during the print curing and heat press.

Thickness

The thickness of DTF transfer film is 75 microns, which provides more stability and durability than thinner film.

Coatings

The PET film is coated with a heat-activated coating layer on the printing side, make it a simple process to heat press the printed patterns onto the garment.

Versatility

The DTF transfer film can be used to print on a wide variety of fabrics, including cotton, polyester, blends, and even some difficult-to-print materials like nylon and leather.

No Pretreatment

Unlike some other transfer methods, DTF printing does not require the fabric to be pretreated, streamlining the production process and reducing the amount of preparation needed.

Compatibility

This transfer film will work with all DTF printers utilizing DTF ink and DTF Transfer Film Powder.

Procolored PET Transfer Film General Specifications

Substrate: Polyethylene Terephthalate (PET)
Thickness: 0.75mm
Film Type: Single-sided Cold Tear
Size: 8.2 in x 328 ft (21 cm x 100 m)
Heat Transfer Temperature/Time: 302-320℉, 8-12 seconds (150-160℃, 8-12 seconds)
Shelf Life: 18 months

Please Note: Keep in a dry place and away from direct sunlight