Pay in installments of $75.00 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 17 - Jul 22
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
Go Rhino V3450674T - V-Series V3 Aluminum Side Steps and Mounting Brackets Kit Textured BlackGo Rhino's V3 side steps bring on a sleek, aerodynamic look, the convenience of corrosion resistant aluminum and strength based on quality engineering and design. Finished with a textured black powder coating, the 5 wide ellipse shaped boards feature anti slip polymer step pads with a multi dimensional tire tread pattern so rain, snow and slush easily drain off and reduce the risk of slipping while stepping up into your vehicle. Each V3 board is
Go Rhino's V3 side steps bring on a sleek, aerodynamic look, the convenience of corrosion-resistant aluminum and strength based on quality engineering and design. Finished with a textured black powder coating, the 5” wide ellipse-shaped boards feature anti-slip polymer step pads with a multi-dimensional tire tread pattern so rain, snow and slush easily drain off and reduce the risk of slipping while stepping up into your vehicle. Each V3 board is fortified with a dual core full length extrusion allowing the board to support up to 300 lbs per step pad (600 lbs per side for 4-door vehicles). Hardware and brackets are included and installation on most vehicles will not require drilling. The V3 Side Steps come with a Limited Lifetime warranty on materials and construction and a 5 year warranty on the Textured Black Finish.
Specifications:
| Description_SHO | V-Series SideBar Kit |
| Description_INV | V-Series - Complete kit: Side Bar+Brckts |
| Description_KEY | Jeep, Wrangler, JL, Running Board, Wet Weather, Protection, Rain, Mud, Aluminum |
| Description_DES | V-Series V3 Aluminum Side Steps and Mounting Brackets Kit - Textured Black |
| Description_EXT | Aluminum side step construction is ideal for extreme climates |
| Description_MKT | Go Rhino's V3 side steps bring on a sleek, aerodynamic look, the convenience of corrosion-resistant aluminum and strength based on quality engineering and design. Finished with a textured black powder coating, the 5” wide ellipse-shaped boards feature anti-slip polymer step pads with a multi-dimensional tire tread pattern so rain, snow and slush easily drain off and reduce the risk of slipping while stepping up into your vehicle. Each V3 board is fortified with a dual core full length extrusion allowing the board to support up to 300 lbs per step pad (600 lbs per side for 4-door vehicles). Hardware and brackets are included and installation on most vehicles will not require drilling. The V3 Side Steps come with a Limited Lifetime warranty on materials and construction and a 5 year warranty on the Textured Black Finish. |
| Description_FAB | Anti-slip polymer step pad with multi-dimensional tire tread pattern allows rain, snow and slush to drain from surface, reducing risk of slipping |
| Description_FAB | Complete kit with side bars and mounting brackets |
| Description_FAB | Corrosion-resistant aluminum construction with textured black powder coat finish for longer product life |
| Description_FAB | Easy, no-drill installation |
| Description_FAB | Ellipse-shaped board provides wide 5" step pad area for greater safety and security |
| Description_FAB | Limited Lifetime warranty on materials and construction and a 5 year warranty on the Textured Black Finish. |
| Description_FAB | Internally fortified extruded aluminum core supports up to 300 lbs. per side-600 lbs. total |
| Description_DEF | Step Nerf Bar |
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.6 ★★★★★
Based on 17 reviews
Sort
Product Reviews
★★★★★ 5
Not as complicated to put together as it seems, and quite sturdy
Size: Width 14", Adjustable Desk Mount, Style: Triple
When I first unpacked this stand, I was initially overwhelmed by the number of parts that were included in the package. I didn’t realize there were extra parts included to offer you two choices for how to mount the stand to your workstation. Once I got that sorted out, I relaxed a bit more and was able to assemble the unit single-handedly and mount two 22” monitors and a laptop to give myself more room on my desk. It was a bit challenging to move the arms to just the right angles and height, but I did get it after a few tries.
I used the re-positionable clamp instead of the desk- through grommet mount. It feels very sturdy, and I feel as long as I periodically check the tension and tightness of the bolts, it will hold up everything just fine.
I am not thrilled with the cable management clamps that attach to the round center pole, so I’ll probably end up looking for different clamps or even just velcro fasteners to loop around the post. The clamps that snap onto the arms themselves are fine and hold the Displayport and power cords in place well.
I thought about dinging this unit a star for the weird center post clamps and also because the black coating on part of the round post is flaking off, but really, I can work with those things/cover up the cosmetic issues.
I was super-impressed by the way the hardware was included in labeled, individual plastic compartments. The instructions were pretty good, too, although I would have liked the print to be a little larger - once you hit your forties, you reach for readers or have to get up close and squint to see small print…
Overall, I’m pleased with this unit.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 12, 2025
★★★★★ 5
Game changer
Size: Width 14", Adjustable Desk Mount, Style: Dual, Size: Width 14", Adjustable Desk Mount, Style: Dual
**update 2026**
Okay I've just upgraded this mount so let me update my review. I am keeping 5 stars because for an entry level budget mount it did its job.
Here's why I changed: if your desk is not solid wood, the base of the mount is too narrow and will start to sink in. Also, after a few years one of the arm started to sag. I upgraded for a mount double this price so not outrageous but the base is wider and the arms are sturdier. I am still happy I purchased that one because for my budget it did the job so these years and it's better than not having it. Still recommend if your budget is low and you need to save desk space, it's a great starter. If you can wait and save twice this, I suggest you do and skip to the better ones though.
**original review 2020**
Been using this mount for about 3 months, time to review:
It is an absolute game changer! Cheap, easy to assemble and install, feels sturdy. At first my wife was skeptical because she thought it would be a gimmick but it frees up so much space, it brings both monitors to the same eye-level height, the mouse cable never gets stuck under the laptop anymore, and it holds the cables in place so that when she has to run with the laptop they don't fall behind the desk anymore (see picture). All these little details improved her productivity. And just visually it looks much better I think. Laptop: 15" Monitor: 24"
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 9, 2020
★★★★★ 3
Works fine overall, but... "you get what you pay for"
Size: Width 16.5", Fully Adjustable Desk Mount, Style: Single
Filed under: "you get what you pay for"? I like the price point and FOR THE MOST PART this arm is getting the job done in my home office space *but* a few points...
(1) The little "claw" to hold the laptop in place has these little "locks" that are on the under side which... that's OK but they can be hard to see and it just seems like an extra part that can break -- vs. a ratcheting clamp.
(2) The tension on every movable part was ALL out of whack when I first installed it. I set the laptop onto the cradle and it basically collapsed -- flipping down as far as it would go. I had to adjust the tension to be significantly higher in order to hold steady -- but NOW it's hard to "fine-tune" because the tension on that joint is so stiff. On the other hand, the main "elbow" joint is easy to adjust *and* holds steady all day, but within seconds of taking my laptop off of the arm, it springs up -- sometimes rather violently.
(3) The overall build quality seems a little weak. The main screw to hold the laptop stand in place had a little cap to make it easier to twist it by hand -- but this snapped off during the initial installation. Not a deal-breaker because once it was in place, I didn't expect to move it again BUT it was still disappointing.
(4) Not a deal-breaker for me BUT... there's practically no included cable management. Just... be aware of that.
Otherwise... instructions were pretty clear vis-à-vis how to install and -- like I said -- it seems to be getting the job done w/r/t/ getting the laptop up off the desk and MOSTLY aligned with my other monitors.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 23, 2025
★★★★★ 5
Superb quality. Couldn't be happier.
Size: Width 14", Adjustable Desk Mount, Style: Dual
I have been looking for a separate monitor and laptop stand for a while now and recently came across this set up from WALI. For under $50, I was a little nervous about the quality before it arrived. I had no reason to be concerned. It is a SOLID set up. Everything is high-quality metal construction and secure when assembled. Set up took some doing but only because I am not the most, um, detailed direction follower...Make sure you tighten the tray and post screws TIGHTLY initially to prevent any kind of movement after you've assembled it (don't ask me how I know).
I have a 15'' Asus laptop and the lip on the tray holds it fine as long as I don't tip it too far forward. But it's an unusually thick laptop body so I imagine most won't have an issue. Again, it's not a problem for me at all, just limits slightly the angle I can tilt the tray.
If you are ok with the configuration shown in the primary product image (i.e., monitor above tray) then it will be no problem as is. My desk isn't that deep so I had wanted them to be side-by-side. I was able to set it up that way out of the box. But my monitor was just a hair too big and it cast a shadow on the laptop monitor in the side by side configuration. Support was kind enough to send me a second base post and screws so I could use the grommet and clamp bases at the same time (as is you can only use one or the other). This of course only works if you already have a hole in the desk (or are willing to put one in yourself). Many thanks to WALI's support crew for accommodating me.
I use a standing desk. If movement while you type is something you're fussy about (I'm not) note there will be some shake, especially in the standing position. But for most, it should be absolutely no problem.
Overall a fantastic deal. Highly recommend it!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 18, 2018
★★★★★ 5
A Powerhouse USB Hub That Handles Everything I Throw at It
Color: Gray
I’ve been using this 17‑Port 96W Powered USB 3.2 Hub for a few weeks now, and it has completely streamlined my workspace. With 10 USB‑A 3.2 ports, 2 USB‑C 3.2 ports, 3 QC 24W fast‑charging ports, and an SD/TF card reader, this hub truly replaces multiple adapters and dongles. The 10Gbps transfer speeds are legit — large files from my SSDs move quickly and consistently without random disconnects.
The 96W power supply is a huge plus. Even with multiple external drives, peripherals, and a webcam connected, everything stays stable. No flickering, no dropouts, no “device not recognized” issues. The individual power switches are surprisingly useful too — I can turn off specific drives without unplugging anything.
The build quality feels solid and premium. It doesn’t slide around, and it stays cool even under heavy load. The SD/TF card reader is fast and convenient for photo/video work. The QC fast‑charging ports are also great for topping up my phone or accessories, though they’re charging‑only (no data), which is clearly stated.
If you’re someone who uses multiple devices — external HDDs, flash drives, cameras, microphones, card readers, etc. — this hub is a game changer. It’s perfect for PC setups, content creators, IT workstations, and anyone who needs serious connectivity.
Overall, this is one of the most capable, stable, and well‑designed USB hubs I’ve used. Absolutely worth it.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 4, 2026
recommand products
LUVERNE 477125-401339 - Regal 7 Polished Stainless 125 Oval W2W Steps, Select Ram 3500
512.48
LUVERNE 480421 - Polished Stainless Steel Side Entry Steps, Select Ford F-150 Regular Cab
155.50
HKM-952915 26800mAh Waterproof Solar Power Bank with Emergency Camping Light, Dust-Proof and Fall-Proof Design
97.99
CURT 11649 - Class 1 Fixed-Tongue Trailer Hitch with 3/4in. Ball Hole
142.50
LUVERNE 477108-401747 - Regal 7 Polished Stainless 108 Oval W2W Steps, Select Silverado, Sierra HD
423.00