Pay in installments of $25.71 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 23 - Jul 28
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
JAC0524G-XLR - Schauer 24V, 5A Fully Automatic Electronic Charger/Maintainer for GEL Batteries - 115VAC - XLR 3-Pin PlugModel JAC0524G XLR (0891 23) Schauer JAC0524G XLR 24V, 5A Intelligent Electronic Charger with XLR Plug, Optimized for GEL Batteries The Schauer JAC0524G XLR is a Fully Automatic, 3 Stage Electronic Charger with XLR Plug. This charger is OPTIMIZED FOR GEL BATTERIES (GELLED ELECTROLYTE). The Finish Voltage of 28. 5VDC enhances battery life in gelled electrolyte batteries (This is slightly lower than the standard JAC0524 XLR at 28. 8VDC). Specially
Model JAC0524G-XLR (0891-23)
Schauer JAC0524G-XLR - 24V, 5A Intelligent Electronic Charger with XLR Plug, Optimized for GEL Batteries
The Schauer JAC0524G-XLR is a Fully Automatic, 3-Stage Electronic Charger with XLR Plug. This charger is OPTIMIZED FOR GEL BATTERIES (GELLED ELECTROLYTE). The Finish Voltage of 28.5VDC enhances battery life in gelled electrolyte batteries (This is slightly lower than the standard JAC0524-XLR at 28.8VDC). Specially equipped with a 3-Pin XLR DC Plug, this charger is an excellent choice for charging and maintaining batteries in medical mobility scooters & wheelchairs with 24 volt GEL battery systems up to 75AH capacity. This Intelligent Charger may be left connected to the battery indefinitely, keeping it safely charged without danger of overcharging.
The JAC0524G-XLR will charge any type lead acid battery, but is optimized for gelled electrolyte batteries. Other lead acid types should use model JAC0524-XLR.
The 3-Stage Charge Control provides Modified Constant Current Charge to a constant finishing voltage, then to a float/standby voltage to maintain the battery in a fully charged condition.
Features
• Fully Automatic with Float/Maintenance Mode
• May be left connected to batteries indefinitely
• OPTIMIZED FOR GEL BATTERIES (GELLED ELECTROLYTE)
• 115VAC Input
• Mountable, Aluminum case with LED status lights
• Current limiting
• Short Circuit and Reverse-Polarity protection (user-replaceable fuse)
• Capable of full current at 25.2V continuous - 100% duty cycle
Specifications
• Finish Voltage: 28.5V ±0.2
• Float Voltage: 26.5V ±0.2
• AC Input Voltage: 115VAC 50/60Hz (220/240VAC conversion available, see manual)
• AC Input Amps: 3A
• Nominal DC Output Volts: 24V
• Nominal DC Output Amps: 5A
• Minimum Battery Voltage Required to Start Charging: 8V
• AC Cord: 72", with grounded North America 115VAC plug (IEC C13 connector)
• DC Lead: 45", with 3-Pin XLR Plug (#1 Pin POS+) (12" DC output lead, with replaceable 33" XLR plug adapter)
• Unit Length (case): 6.5" (not including mounting flanges)
• Unit Length (overall): 7.5" (includes mounting flanges)
• Unit Width: 3.5"
• Unit Height: 1.8"
• Unit Weight: 1.8 lbs.
• Approvals: UL/cUL, CE
• Warranty: 2 Year Limited
Operation
• Not intended for use as a DC power supply
• Operate in an environment with proper ventilation
• Do not operate in a damp or wet environment
LED Status Indicator Light in normal charge cycle:
• LED1 (Left): RED – AC power connected, Power Switch ON
• LED2 (Right): YELLOW – Charging, Bulk and Absorption stages - Fan On
• LED2 (Right): GREEN – Battery Charged, Charger in Maintenance Float mode - Fan Off
NOTE: If LED2 is GREEN when initially connected to a known discharged battery (rather than YELLOW, which indicates normal operation), there is a FAULT in the output connection. Check for the following conditions:
1. Charger Not Connected
2. Minimum Battery Voltage Not Sensed (8V minimum)
3. Output Fuse Blown (check the fuse under the twist cap)
NOTE: PLP Battery Supply recommends that chargers in this range have an amperage output that equates to a minimum of approximately 10-15% the AH capacity of the battery being charged. For example, this 5 amp charger would be appropriate for a battery with a maximum AH capacity in the 50AH-75AH range. Chargers with marginally low output ratings may result in unacceptably long battery charge times and/or damage to the charger.
Information Downloads
Schauer Replacement Fuse Guide
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy